Injection molding machine is a kind of special equipment which combines the thermal processing characteristic of the plastic and the molten metal of the metal. The first plunger type injection molding machine, to the end of 40s to develop a pre - pla...

Mold in the commonly used fastening screws are divided into six angle cylinder head screws (six screws), the six angle flat end screws (no head screws) and six angle screw bolt. In the die, the fastening screws should be ed according to different ne...

(a) die to meet the requirements of working conditions 1, wear resistance When the billet is plastic degeneration in the mold cavity, the surface of the mould is both flowing and sliding, which makes the surface of the mold cavity and the blank to ...

Generally, the plastic and plastic device is provided with a whole rotary mechanism. In the disassembly screw injection molding machine nozzle, screw and barrel, should first unscrew the screw injection seat position, the original position and the de...

Hydraulic transmission hydraulic system of injection molding machine: hydraulic oil as the working medium, through the power components (pump) will be the prime mover of the mechanical energy into hydraulic oil pressure can be, and then through the c...

Speed leading injection When the mold cavity is not filled, the injection pressure (read out from the pressure gauge) is very low, as long as it can overcome the resistance of the melt flow in the nozzle, the runner and the mold cavity. This continu...

As the traditional manufacturing enterprises, the use of mechanical hand to change the mode of production is to reduce the dependence on labor, reduce production costs, the only way to achieve sustainable development. However, many enterprises in the...

, screw diameter (D) A, the required amount of injection and injection volume: =1/4* PI *D2*S (*0.85 injection stroke); B, in general, the screw diameter of D and the maximum injection pressure is inversely proportional to the capacity of the plast...

Die casting die is a very expensive special precision machinery, require mold maintenance workers not only exquisite technology, fine style, but also a serious and responsible spirit. Mold maintenance work should be familiar with the technical standa...

Process analysis of plastic products. In the mold design, the designer should make full analysis of its plastic products in accordance with the principle of injection molding processing, and the designers need to carefully negotiate with the product...

Since the last century asylum safety standards issued in 80s has been for the plastics and rubber industry workers, and a series of standards for the whole world, plastic and rubber machinery standard TC 145 and ISO/TC27 European Standardization Comm...

Generally speaking, in the injection molding industry for many years, customers have the ability to judge and the appropriate injection molding machine to produce. But in some cases, the customer may require manufacturers to assist injection molding...

Mould manufacturing process is a complex process, from the design, processing, assembly, debugging and other steps, finally can really put into use, in the whole life cycle, factors affecting mold quality are mainly in the following ten aspects: 1 d...

The machining accuracy is the actual size of the surface of the machined part. The shape of the geometric parameters of the three geometric parameters and the requirements of the drawings. The precision of machining accuracy is measured by the tolera...

Headquartered in Germany of berg's o in April this year opened a technology center in Taiwan, said the move was intended to open the sales to local and global manufacturing enterprises. O's overseas sales director Andrea Carta on August 12 t...

Taiwan's largest producer of injection molding machine prosperous xin (FCS) machinery manufacturing co., LTD. Is seeking to expand the market share. Annual sales of about $100 million in the prosperous xin in Dusseldorf K2016 show announced ...